Custom Sawing Your Logs
CUTTING WITH OUR WOODMIZER LT50:
We like to schedule sawing, so...if you have some mesquite logs you want sawn, please call ahead to make sure we will be available to saw when it is convenient for both of us. We certainly don't want to end up sawing in 100+ degree weather. That would take all the fun out of sawing.
We charge $100/ hour to saw typical mesquite logs with a minimum charge of one hour. You will generally end up paying for one blade, even if we don't hit a nail. We will look them over for nails and wash dirty logs, but, if we dull blades, the cost will be passed on to you. Blades cost $25 each. Nails in logs make sawyers upset. Please don't upset us.
We won't saw anything smaller than 3' X 12". We prefer them to be over 5' x 20".
Extremely large logs are harder on our backs and our equipment and we reserve the right to charge $150 or more/hr for the extra special logs.
Also, if you drag in dirty logs, ebony or live oak, and...IF you can persuade me to cut them... you will pay a higher rate for that as well. If I don't believe your logs are worth sawing, I will tell you. If you insist on sawing anyway, be prepared to pay an "Idiot Fee". (In other words, trust you sawyer.)
CUTTING WITH OUR LUCAS MILL:
Our Lucas Dedicated Wide Slab Mill can cut 5' wide slabs. I purchased the "Luke" in 2016 for the purpose of cutting only the largest and most unique logs. I am very particular about which logs I am willing to cut with this slab mill.
When I agree to use it, I have a mininum fee of $500 per log and some logs can be as much as $1500. (These are the ones that are too heavy for my tractor to lift.) But, I will have to be confident that you will get a lot more than that value from the slabs before I will attempt your log. Each chain costs $150 and most trees that grow in South Texas which are big enough to justify this mill, will have enough sand, grit and nails embedded in them to justify building a chain into the cost.
CAN WE COME GET YOUR LOG?
Yes, we can come pick up your log. Super Truck has not found any mesquite trees in the Kingsville area that were too big for him to handle. Inside of Kingsville, we charge $75 per run to pick up your log that is already cut down and ready for pick-up. We don't like to take Super Truck much farther than 30 miles from home and will charge extra to go more than 15 miles from home. (He's getting old and doesn't have air conditioning and I'm spoiled.)
P.S. Please, make sure that when you send us to pick something up that the tree truly is big enough to justify the pick-up and the sawing fees. It's really frustrating when someone says they have a "Really Big" tree and we get there only to find out that it's all firewood barely large enough to square up into posts. The term "Really Big" is relative.
WILL WE COME CUT DOWN YOUR TREE?
We are getting more particular about which trees we will come pick up for free. If it is a large tree and you are giving us the wood, we will GENERALLY come cut it down in exchange for the trunk. You save money and we potentially get a nice trunk or two. If there are houses or fences in the way, we will discuss the fee. We generally will pile the branches by the curb for the city pick up.
If it is a really busy season for cutting (like after a large storm), we may also charge a nominal fee for cuttng down a tree that would normally be free - mostly because of the time factor of everybody wanting their yard cleaned up after a storm at the same time. But, even then, we are still cheaper than a commercial tree removal company. If you can wait....well, no problem. If you're in a hurry, be willing to pay for it. But, please, don't tell me you're not in a hurry and then call me every few days.
If the tree is small, has nails in it, has fungus growing on it, or is undesirable as a saw log or if it is a difficult extraction, we have a working relationship with Corpus Christi Firewood Expert Lumber Jack, Ryan Watson.
NOTE: We are not into the storage business. As of January 2013, any logs left more than 60 days without follow up BY THE CUSTOMER become the property of Nave's Sawmill. Unless you are one of our "Regular Customers" and have an ongoing rotating stock of logs, we will not be held responsible for keeping track of storing logs or lumber longer than 60 days. Please be reasonable about this. Lots of people bring logs to us. We are not a storage facility.
SPECIAL NOTE ABOUT
HURRICANE HARVEY LIVE OAK LOGS
Since Hurricane Harvey hit the gulf coast of Texas we have received calls about sawing Live Oak. Here's a few comments about Live Oak:
What I am NOT willing to do with Live Oak:
1). No, I do not recommend sawing Live Oak unless you are making thick slab furniture.
2). I will NOT saw live oak that has been down or dead longer than 6 months (I just gets too hard as it dries out.)
3). The giant trunks are not worth the time, expense or wear and tear on my equipment. Don't ask me to saw them.
What I am willing to do with Live Oak:
1). I will saw logs up to 25" diameter but I will charge $150 /hour plus blades.
2). I recommend sawing 3" thick or more.
Projects that you can do with Live Oak:
Thick slab furniture
Flat bed trailer decking
SAWING END GRAIN CIRCLES OR OVALS.
We can cut cross sections from logs up to about 20" diameter. These are highly desired for taxidermy plaques and for rustic table decorations for weddings and banquets.
If you bring in small logs between 2 to 4' long we can cut 3 to 4 of these in an hour.
The saw is made to cut lumber, not cross sections. It is a bit more time consuming and labor intensive. Be prepared to help, it is a two or three person job positioning the logs. Also, I reserve the right to say that a logs is not safe to cut or not worth the effort to cut in this manner.
I do have cross sections already cut, sanded and finished for table decorations that I rent for weddings/banquets at $5 each. And I have matching cake stand and cup cake stands for rent at $50 each.
P.S. Do do not bring in cross sections that have been cut with a chainsaw and ask me to flatten them.
FURNITURE FROM YOUR TREE?
We are often asked if we can make a dining table, etc, from your tree. Yes.... if the tree lends itself to the task. The thing most people don't understand is that not every tree is suitable for a table. There is also a considerable wait for the lumber to dry after it has been sawn. (Yes, even a log that has been on the ground a few years still has lots of moisture in it and needs to dry for a year after sawing.)
So, here's how we tackle this. You bring in your logs. We will saw them based on the design you have in mind and at this time you pay the sawing fees. We determine then if the lumber will make what you want and if you need to bring in more logs for your project. The lumber goes back to your house for drying. (Unless you want to pay storage fees). In a year, you bring the lumber back. We settle on a design, a price and a time frame for completion. Once you make a deposit of at least 25%, we will begin your project. If your tree rendered enough lumber appropriate for your design, then your lumber will save you approximately 10-25% of the cost of a table.